Difference between revisions of "Projects:2019s1-180 Nanogrid Development for Households Applications"
| Line 13: | Line 13: | ||
An electrical grid (macrogrid) is electrical power system network which consists of a generating plant, transmission lines, the substation, transformers, the distribution lines, and the person who consumes the electricity. Typically, electrical grids have depended on a central generation plant which usually far away from the main consumption areas, being towns and cities. | An electrical grid (macrogrid) is electrical power system network which consists of a generating plant, transmission lines, the substation, transformers, the distribution lines, and the person who consumes the electricity. Typically, electrical grids have depended on a central generation plant which usually far away from the main consumption areas, being towns and cities. | ||
The electrical grid can be broken down into 3 subsections. It consists of: Generation, Transmission & Distribution, and Consumption. | The electrical grid can be broken down into 3 subsections. It consists of: Generation, Transmission & Distribution, and Consumption. | ||
| − | The generation | + | The generation components of the electrical grid can be classified as either centralized generation, or decentralized generation. Centralized generation consists of a large electrical production plant, which distributes electricity to the consumers via the grid. Centralized generation may include coal, nuclear, natural gas, hydropower, wind farms, and large solar arrays. |
Decentralized generation is generated power that occurs close to consumption, such as rooftop solar. | Decentralized generation is generated power that occurs close to consumption, such as rooftop solar. | ||
Once the electricity has been produced in the generation stage, it must pass through the transmission & distribution component in order to reach the consumers. This component consists of transformers, substations, and transmission lines which transmit the electricity over long distances. | Once the electricity has been produced in the generation stage, it must pass through the transmission & distribution component in order to reach the consumers. This component consists of transformers, substations, and transmission lines which transmit the electricity over long distances. | ||
After the transmission & distribution stage, the electricity reaches the consumption stage, where the electricity is consumed by the consumers at their demand. | After the transmission & distribution stage, the electricity reaches the consumption stage, where the electricity is consumed by the consumers at their demand. | ||
The goal of an electrical grid is to safely and stably distribute electrical power, based on consumer’s demand, at prescribed levels of security, whilst ensuring system frequency and voltage levels remain relatively constant. | The goal of an electrical grid is to safely and stably distribute electrical power, based on consumer’s demand, at prescribed levels of security, whilst ensuring system frequency and voltage levels remain relatively constant. | ||
| + | |||
Managing an electrical grid consists of several challenges, which arise from managing the supply of electricity production to match consumer demand, as well as ensuring that the voltage and frequency remain constant at prescribed levels across the entire grid. In recent years, maintaining the constant frequency and voltage levels has become increasingly challenging due to the rapid integration of renewable energy sources. | Managing an electrical grid consists of several challenges, which arise from managing the supply of electricity production to match consumer demand, as well as ensuring that the voltage and frequency remain constant at prescribed levels across the entire grid. In recent years, maintaining the constant frequency and voltage levels has become increasingly challenging due to the rapid integration of renewable energy sources. | ||
Before the introduction of renewable energy to the electrical grids, grids relied on a non-renewable power source to produce the electricity. Maintaining constant frequency and voltage is simplified with these non-renewable sources due to them being synchronous generators - which converts mechanical power from a prime mover into an AC electrical power at a particular voltage and frequency. The constant speed of the generator - called the synchronous speed - results in the constant voltage and frequency output, and hence allows for energy management to be accurately managed, allowing for grid reliability and stability. | Before the introduction of renewable energy to the electrical grids, grids relied on a non-renewable power source to produce the electricity. Maintaining constant frequency and voltage is simplified with these non-renewable sources due to them being synchronous generators - which converts mechanical power from a prime mover into an AC electrical power at a particular voltage and frequency. The constant speed of the generator - called the synchronous speed - results in the constant voltage and frequency output, and hence allows for energy management to be accurately managed, allowing for grid reliability and stability. | ||
| − | On the other hand, renewable energy sources particularly wind and solar energy, can have fluctuating output. Wind turbine power output may fluctuate due to wind speed rarely being constant, and with the tendency to completely drop off at any given moment. | + | On the other hand, renewable energy sources particularly wind and solar energy, can have fluctuating output. Wind turbine power output may fluctuate due to wind speed rarely being constant, and with the tendency to completely drop off at any given moment. |
| − | |||
The fluctuating wind speed leads to a variety of rotational speeds of the wind turbine, which impacts its output, as different speed correspond to different frequency voltage levels. | The fluctuating wind speed leads to a variety of rotational speeds of the wind turbine, which impacts its output, as different speed correspond to different frequency voltage levels. | ||
| − | The output of a solar photovoltaic cell may also fluctuate due to clouds impacting solar intensity, which also leads to a unpredictable output. | + | The output of a solar photovoltaic cell may also fluctuate due to clouds impacting solar intensity, which also leads to a unpredictable output. |
| − | |||
| − | + | Around the world, the integration of renewable energy into electrical grids - through either centralized systems (wind/solar farms) or distributed generation (rooftop solar) - has led to significant difficulties with managing the power system due to these exact fluctuations in output, leading to unstable frequency, hence a degree of unreliability. | |
This case of management difficulty is relevant to South Australia, due to the SA government making a long term commitment of maximising renewable energy output, with the eventual goal of achieving 100% renewable. This led to South Australia closing down the Northern Power Station - SA’s largest coal power plant - making the main source of electricity production renewable energy. This led to significantly high electricity prices, and reliability issues. | This case of management difficulty is relevant to South Australia, due to the SA government making a long term commitment of maximising renewable energy output, with the eventual goal of achieving 100% renewable. This led to South Australia closing down the Northern Power Station - SA’s largest coal power plant - making the main source of electricity production renewable energy. This led to significantly high electricity prices, and reliability issues. | ||
These management difficulties have lead to the potential need to research different grid options so that renewable energy can become a reliable and dependable source for the future. | These management difficulties have lead to the potential need to research different grid options so that renewable energy can become a reliable and dependable source for the future. | ||
This is where smaller scale grids, such as microgrids and nanogrids, become significant. | This is where smaller scale grids, such as microgrids and nanogrids, become significant. | ||
A microgrid is defined as a small network of electricity users with a local source of supply that is usually attached to a centralized national grid, but is able to function independently. A microgrid is essentially the same as the macrogrid, but at a communal level. The same definition of this applies to nanogrids, except that nanogrids typically applies for a single building, whether it be a household or office building. | A microgrid is defined as a small network of electricity users with a local source of supply that is usually attached to a centralized national grid, but is able to function independently. A microgrid is essentially the same as the macrogrid, but at a communal level. The same definition of this applies to nanogrids, except that nanogrids typically applies for a single building, whether it be a household or office building. | ||
| − | In order to completely integrate renewable energy to become a dependable source, the issue of reliability and costs must be solved. Currently, there are a few different methods that grids largely dependent on renewable sources use. One method is the use of large scale battery storage. Battery storage was introduced to South Australia’s grid, when Tesla-Neoen constructed a 100 MW lithium-ion grid support battery. The aim of implementing the large scale batteries was to improve the stability of the SA grid, which experienced a significant amount of instability prior to the battery’s construction. The goal of the battery’s construction was to identify if the grid could become fully dependent on renewable energy with the inclusion of energy storage, as a precursor for the rest of the world. Since its implementation, the battery has demonstrated success in stabilising grid frequency and managing the RoCoF. The similarities this has to the proposed nanogrid system is the dependence the grid has on renewable energy sources, as well as integrating it with battery storage. The key difference to the proposed nanogrid system is the use of battery storage to maintain stability of the grid frequency. The proposed nanogrid project aims to use the battery storage as a backup energy source, rather than frequency management. | + | In order to completely integrate renewable energy to become a dependable source, the issue of reliability and costs must be solved. Currently, there are a few different methods that grids largely dependent on renewable sources use. One method is the use of large scale battery storage. Battery storage was introduced to South Australia’s grid, when Tesla-Neoen constructed a 100 MW lithium-ion grid support battery. The aim of implementing the large scale batteries was to improve the stability of the SA grid, which experienced a significant amount of instability prior to the battery’s construction. The goal of the battery’s construction was to identify if the grid could become fully dependent on renewable energy with the inclusion of energy storage, as a precursor for the rest of the world. Since its implementation, the battery has demonstrated success in stabilising grid frequency and managing the Rate of Change of Frequency (RoCoF). The similarities this has to the proposed nanogrid system is the dependence the grid has on renewable energy sources, as well as integrating it with battery storage. The key difference to the proposed nanogrid system is the use of battery storage to maintain stability of the grid frequency. The proposed nanogrid project aims to use the battery storage as a backup energy source, rather than frequency management. |
| + | An example of a microgrid being used is at the Santa Rita Jail, where a microgrid consisting of a 1.2 MW PV system, battery storage, as well as backup diesel generators. This particular system is a larger scale version of the proposed nanogrid, except without the combination of wind and solar. | ||
| + | Despite these methods working, the large scale grid in SA still leads to extremely high electricity prices, and less stability. The aim of the project is to develop a nanogrid system for household/office applications, which can replicate the results identified by the jail microgrid, of being able to provide secure and reliable energy to the household/office, at a low cost of energy. The goal is also to achieve a nanogrid that can be dependent on itself to provide constant and reliable energy to meet demand. | ||
'''Introduction:''' | '''Introduction:''' | ||
Revision as of 23:04, 9 April 2019
Members & Supervisors: Supervisor - Nesimi Ertugrul Wassim Saad Dehong Wang Shuting Dai
Abstract:
Background:
What is a grid?
An electrical grid (macrogrid) is electrical power system network which consists of a generating plant, transmission lines, the substation, transformers, the distribution lines, and the person who consumes the electricity. Typically, electrical grids have depended on a central generation plant which usually far away from the main consumption areas, being towns and cities. The electrical grid can be broken down into 3 subsections. It consists of: Generation, Transmission & Distribution, and Consumption. The generation components of the electrical grid can be classified as either centralized generation, or decentralized generation. Centralized generation consists of a large electrical production plant, which distributes electricity to the consumers via the grid. Centralized generation may include coal, nuclear, natural gas, hydropower, wind farms, and large solar arrays. Decentralized generation is generated power that occurs close to consumption, such as rooftop solar. Once the electricity has been produced in the generation stage, it must pass through the transmission & distribution component in order to reach the consumers. This component consists of transformers, substations, and transmission lines which transmit the electricity over long distances. After the transmission & distribution stage, the electricity reaches the consumption stage, where the electricity is consumed by the consumers at their demand. The goal of an electrical grid is to safely and stably distribute electrical power, based on consumer’s demand, at prescribed levels of security, whilst ensuring system frequency and voltage levels remain relatively constant.
Managing an electrical grid consists of several challenges, which arise from managing the supply of electricity production to match consumer demand, as well as ensuring that the voltage and frequency remain constant at prescribed levels across the entire grid. In recent years, maintaining the constant frequency and voltage levels has become increasingly challenging due to the rapid integration of renewable energy sources. Before the introduction of renewable energy to the electrical grids, grids relied on a non-renewable power source to produce the electricity. Maintaining constant frequency and voltage is simplified with these non-renewable sources due to them being synchronous generators - which converts mechanical power from a prime mover into an AC electrical power at a particular voltage and frequency. The constant speed of the generator - called the synchronous speed - results in the constant voltage and frequency output, and hence allows for energy management to be accurately managed, allowing for grid reliability and stability. On the other hand, renewable energy sources particularly wind and solar energy, can have fluctuating output. Wind turbine power output may fluctuate due to wind speed rarely being constant, and with the tendency to completely drop off at any given moment. The fluctuating wind speed leads to a variety of rotational speeds of the wind turbine, which impacts its output, as different speed correspond to different frequency voltage levels. The output of a solar photovoltaic cell may also fluctuate due to clouds impacting solar intensity, which also leads to a unpredictable output.
Around the world, the integration of renewable energy into electrical grids - through either centralized systems (wind/solar farms) or distributed generation (rooftop solar) - has led to significant difficulties with managing the power system due to these exact fluctuations in output, leading to unstable frequency, hence a degree of unreliability. This case of management difficulty is relevant to South Australia, due to the SA government making a long term commitment of maximising renewable energy output, with the eventual goal of achieving 100% renewable. This led to South Australia closing down the Northern Power Station - SA’s largest coal power plant - making the main source of electricity production renewable energy. This led to significantly high electricity prices, and reliability issues. These management difficulties have lead to the potential need to research different grid options so that renewable energy can become a reliable and dependable source for the future. This is where smaller scale grids, such as microgrids and nanogrids, become significant. A microgrid is defined as a small network of electricity users with a local source of supply that is usually attached to a centralized national grid, but is able to function independently. A microgrid is essentially the same as the macrogrid, but at a communal level. The same definition of this applies to nanogrids, except that nanogrids typically applies for a single building, whether it be a household or office building. In order to completely integrate renewable energy to become a dependable source, the issue of reliability and costs must be solved. Currently, there are a few different methods that grids largely dependent on renewable sources use. One method is the use of large scale battery storage. Battery storage was introduced to South Australia’s grid, when Tesla-Neoen constructed a 100 MW lithium-ion grid support battery. The aim of implementing the large scale batteries was to improve the stability of the SA grid, which experienced a significant amount of instability prior to the battery’s construction. The goal of the battery’s construction was to identify if the grid could become fully dependent on renewable energy with the inclusion of energy storage, as a precursor for the rest of the world. Since its implementation, the battery has demonstrated success in stabilising grid frequency and managing the Rate of Change of Frequency (RoCoF). The similarities this has to the proposed nanogrid system is the dependence the grid has on renewable energy sources, as well as integrating it with battery storage. The key difference to the proposed nanogrid system is the use of battery storage to maintain stability of the grid frequency. The proposed nanogrid project aims to use the battery storage as a backup energy source, rather than frequency management.
An example of a microgrid being used is at the Santa Rita Jail, where a microgrid consisting of a 1.2 MW PV system, battery storage, as well as backup diesel generators. This particular system is a larger scale version of the proposed nanogrid, except without the combination of wind and solar. Despite these methods working, the large scale grid in SA still leads to extremely high electricity prices, and less stability. The aim of the project is to develop a nanogrid system for household/office applications, which can replicate the results identified by the jail microgrid, of being able to provide secure and reliable energy to the household/office, at a low cost of energy. The goal is also to achieve a nanogrid that can be dependent on itself to provide constant and reliable energy to meet demand.
Introduction:
