Difference between revisions of "Projects:2016s1-132 RF Transceiver Design for a Portable Radar"

From Projects
Jump to: navigation, search
(→‎Students)
(→‎Aim)
Line 9: Line 9:
  
 
== Aim ==
 
== Aim ==
−
The aim of this project is to produce a miniaturised PCB that will function as a transceiver for the radar system. This project continues from previous years and will mainly focus on the design and production of the transceiver.
+
This project aims to implement a portable Radar transceiver capable of measuring a target's range and radial velocity. The transceiver shall be implemented into a PCB (Printed Circuit Board) containing RF and analogue subsystems and audio input/output to a computing system for processing and display. The system shall have a range resolution smaller than 2m and a range of approximately 100m for a target with a radar cross section of 1m squared.

Revision as of 19:46, 26 October 2016

Supervisors

Dr Brian Ng, Dr Hong Gunn Chew

Students

Benjamin Arthur, Nicholas Aspinall

Aim

This project aims to implement a portable Radar transceiver capable of measuring a target's range and radial velocity. The transceiver shall be implemented into a PCB (Printed Circuit Board) containing RF and analogue subsystems and audio input/output to a computing system for processing and display. The system shall have a range resolution smaller than 2m and a range of approximately 100m for a target with a radar cross section of 1m squared.

Retrieved from "https://projectswiki.eleceng.adelaide.edu.au/projects/index.php?title=Projects:2016s1-132_RF_Transceiver_Design_for_a_Portable_Radar&oldid=7239"