Difference between revisions of "Projects:2018s1-122 NI Autonomous Robotics Competition"
| Line 19: | Line 19: | ||
This project investigates the use of the NI MyRIO-1900 FPGA/LabView platform for autonomous vehicles. The group will apply for | This project investigates the use of the NI MyRIO-1900 FPGA/LabView platform for autonomous vehicles. The group will apply for | ||
the competition in March 2018, with the competition taking place in September 2018. | the competition in March 2018, with the competition taking place in September 2018. | ||
| + | |||
| + | == Processing Platform == | ||
| + | MyRIO - 1900 | ||
| + | Contains CPU and FPGA for processing | ||
| + | |||
| + | == Programming Environment == | ||
| + | MyRIO is programmed using LabVIEW Environment | ||
== Robot Sensors == | == Robot Sensors == | ||
| Line 27: | Line 34: | ||
The sensors used: | The sensors used: | ||
| − | + | * Image sensor: Microsoft Kinect | |
| − | + | * Range sensors: ultrasonic, time of flight | |
| − | + | * Motor rotation sensors: motor encoders | |
=== Image Sensor === | === Image Sensor === | ||
| Line 40: | Line 47: | ||
==== RGB Image Processing ==== | ==== RGB Image Processing ==== | ||
The competition requires the robot to use the colour images for the following purposes: | The competition requires the robot to use the colour images for the following purposes: | ||
| − | + | *Identify boundaries on the floor that are marked with 50mm wide coloured tape | |
| − | + | *Identify wall boundaries | |
| + | |||
| + | Such processing will be taxing on the processor. Fortunately the myRIO contains an FPGA that can be used instead. This | ||
The competition track boundaries are marked on the floor with 50mm wide coloured tape. The RGB images are processed to extract useful information. | The competition track boundaries are marked on the floor with 50mm wide coloured tape. The RGB images are processed to extract useful information. | ||
| Line 49: | Line 58: | ||
An overview of the pipeline is as follows: | An overview of the pipeline is as follows: | ||
| − | + | #Import/read captured RGB image | |
| − | + | #Convert RGB (Red-Green-Blue) to HSV (Hue-Saturation-Value) | |
| − | The HSV representation of images allows us to easliy: isolate particular colours (Hue range), select colour intensity (Saturation range), and select brightness (Value range) | + | #*The HSV representation of images allows us to easliy: isolate particular colours (Hue range), select colour intensity (Saturation range), and select brightness (Value range) |
| − | + | #Produce mask around desired colour | |
| − | + | #Erode mask to reduce noise regions to nothing | |
| − | + | #Dilate mask to return mask to original size | |
| − | + | #Isolate edges of mask | |
| − | + | #Calculate equations of the lines that run through the edges | |
==== Depth Image Processing ==== | ==== Depth Image Processing ==== | ||
Revision as of 17:53, 29 August 2018
Contents
Supervisors
Dr Hong Gunn Chew
Dr Braden Phillips
Honours Students
Alexey Havrilenko
Bradley Thompson
Joseph Lawrie
Michael Prendergast
Project Description
Each year, National Instruments (NI) sponsors a competition to showcase the robotics capabilities of students by building autonomous robots using one of their microcontroller and FPGA products. In 2018, the competition focuses on the theme 'Fast Track to the Future' where team robots will perform various tasks on a track that incorporates off-road and slippery terrain, and unforeseen obstacles to be overcome or avoided autonomously. This project investigates the use of the NI MyRIO-1900 FPGA/LabView platform for autonomous vehicles. The group will apply for the competition in March 2018, with the competition taking place in September 2018.
Processing Platform
MyRIO - 1900 Contains CPU and FPGA for processing
Programming Environment
MyRIO is programmed using LabVIEW Environment
Robot Sensors
The robot requires a variety of sensors so that it may "see" track obstacles and boundaries, and so the robot may know its location within the track.
The sensors used:
- Image sensor: Microsoft Kinect
- Range sensors: ultrasonic, time of flight
- Motor rotation sensors: motor encoders
Image Sensor
A camera is used as one of the various sensors for the purpose of determining accurate position and target location estimations. The Microsoft Xbox 360 Kinect Sensor USB 2.0 camera is an ideal candidate for the robot's vision because of it's capabilities, availability, and cost. This camera produces two types of images: RGB images and depth (range) images. The RGB images consist of three channels: red, green, and blue. The depth images are represented with one channel, with each pixel value representing the distance from the camera to the first obstruction encountered.
RGB Image Processing
The competition requires the robot to use the colour images for the following purposes:
- Identify boundaries on the floor that are marked with 50mm wide coloured tape
- Identify wall boundaries
Such processing will be taxing on the processor. Fortunately the myRIO contains an FPGA that can be used instead. This
The competition track boundaries are marked on the floor with 50mm wide coloured tape. The RGB images are processed to extract useful information. Before any image processing was attempted on the myRIO, the pipeline was determined using Matlab and its processing toolbox.
Determining Image Processing Pipeline in Matlab
An overview of the pipeline is as follows:
- Import/read captured RGB image
- Convert RGB (Red-Green-Blue) to HSV (Hue-Saturation-Value)
- The HSV representation of images allows us to easliy: isolate particular colours (Hue range), select colour intensity (Saturation range), and select brightness (Value range)
- Produce mask around desired colour
- Erode mask to reduce noise regions to nothing
- Dilate mask to return mask to original size
- Isolate edges of mask
- Calculate equations of the lines that run through the edges
