Difference between revisions of "Projects:2019s1-113 High Curie Temperature Magnetic Materials"

From Projects
Jump to: navigation, search
Line 6: Line 6:
 
== Introduction ==
 
== Introduction ==
  
Renewable energy is a fast-growing sector of the Australian energy market. However, the adoption of renewable energy, in particular, wind and solar energy, remains limited by the intermittency of generation. Energy storage, as well as Frequency Control and Ancillary Services(FCAS) that are both available and cost-effective, are the new challenges facing the adoption of renewable energy. In order to meet these challenges, various companies have been investigating the viability of offering energy storage systems to the national grid. 1414 Degrees is a company that specializes in Thermal Energy Storage Systems(TESS). 1414 Degrees have developed a secret compound or Phase Change Material(PCM) that has a high latent heat of fusion. The PCM melts at 1414°C, hence their name. Currently, the PCM is heated via resistive heating elements that generate a lot of waste heat and thus require large amounts of power to run. 1414 Degrees would like to move to electromagnetic heating. However, electromagnetic actuation requires materials that remain ferromagnetic at sufficiently high temperatures i.e. have a Curie temperature of at least 1414°C.
+
The current electric power sector is trying to increase the availability, reliability and security of energy supply to the consumers. This pursuit has increased the need to integrate renewable energy (RE) into the electricity sector as a strategy to curb the problem of energy deficiency especially in isolated off-grid settlements. However, the variability in the sources of Renewable supply coupled with conditional changes in the level of energy consumption with respect to time has brought to focus the necessity for electrical energy storage systems (ESSs) [1].
 +
 
 +
Currently, in the energy sector the issue of intermittency is currently solved using battery energy storage systems (BESS). However, BESS faces some key challenges. Once the batteries get full, battery storage will lead to wastage of all other unused renewable energy. Battery storage also faces reduced efficiency as the batteries get older [2]. 
 +
 
 +
As the technologies continue to grow, more and more ESSs emerged with increased efficiency such as thermal energy storage systems (TESS), pumped hydro system (PHS), compressed air energy storage (CAES), fuel cell (FC)3 and  superconducting magnetic energy storage (SMES) [3].  
 +
 
 +
1414 Degrees is a company that specializes in Thermal Energy Storage Systems(TESS) they have developed a special Phase Change Material(PCM). A brief overview of how the TESS works is the PCM is heated using electricity up to 1414°C at this temperature, the silicon transitions to a molten phase. This allowing the storage of a significant amount of energy which can be reclaimed at a desired time i.e. when there is a demand for electricity.  During times of high electrical demand, the silicon transitions from liquid to solid causing a release of heat energy. This heat energy is transformed into electrical energy via turbines that can service electrical demand, at a profit [].
 +
 
 +
The PCM is heated via electrical resistive heating that generate a lot of thermal energy losses and lead to high element temperature. This project will tackle the same problem using electromagnetic heating system in a bid to reduce the thermal losses in the system.
  
 
The purpose of this project is to research, model, build and test materials that
 
The purpose of this project is to research, model, build and test materials that
Line 14: Line 22:
 
# Build and test an electromagnetically actuated high-temperature device
 
# Build and test an electromagnetically actuated high-temperature device
  
=== Project team ===
+
=== Project team members ===
  
 
==== Project students ====
 
==== Project students ====
 
* Gitonga Njeru
 
* Gitonga Njeru
* Nikko Kahindi
+
* Nikko Mugweru Kahindi
  
 
==== Supervisors ====
 
==== Supervisors ====
 
* Dr Andrew Allison
 
* Dr Andrew Allison
  
==== Advisors ====
+
==== 1414 Degrees contacts ====
* Grant Mathieson (1414 Degrees)
+
*Jordan Parham
 +
*Grant Mathieson
 +
 
 +
==== Mechanical engineering contacts ====
 
* Dr Reza Ghomashchi
 
* Dr Reza Ghomashchi
 
* Will Robertson
 
* Will Robertson
Line 47: Line 58:
  
 
== References ==
 
== References ==
[1] C. Kittel, Introduction to solid state physics. New York: J. Wiley & Sons, 1971
+
[1] [1] Yekini Suberu, M., Wazir Mustafa, M. and Bashir, N. (2014). Energy storage systems for renewable energy power sector integration and mitigation of intermittency. [online] ELSEVIER.
 +
 
 +
[2] Divya KC, Ostergaard J. Battery energy storage technology for power systems —an overview. Electr Power Syst Res 2009;79:511–20.
 +
 
 +
[3] C. Kittel, Introduction to solid state physics. New York: J. Wiley & Sons, 1971
  
[2] ...
+
[4] ...

Revision as of 16:59, 20 May 2019

Abstract here

Introduction

The current electric power sector is trying to increase the availability, reliability and security of energy supply to the consumers. This pursuit has increased the need to integrate renewable energy (RE) into the electricity sector as a strategy to curb the problem of energy deficiency especially in isolated off-grid settlements. However, the variability in the sources of Renewable supply coupled with conditional changes in the level of energy consumption with respect to time has brought to focus the necessity for electrical energy storage systems (ESSs) [1].

Currently, in the energy sector the issue of intermittency is currently solved using battery energy storage systems (BESS). However, BESS faces some key challenges. Once the batteries get full, battery storage will lead to wastage of all other unused renewable energy. Battery storage also faces reduced efficiency as the batteries get older [2].

As the technologies continue to grow, more and more ESSs emerged with increased efficiency such as thermal energy storage systems (TESS), pumped hydro system (PHS), compressed air energy storage (CAES), fuel cell (FC)3 and superconducting magnetic energy storage (SMES) [3].

1414 Degrees is a company that specializes in Thermal Energy Storage Systems(TESS) they have developed a special Phase Change Material(PCM). A brief overview of how the TESS works is the PCM is heated using electricity up to 1414°C at this temperature, the silicon transitions to a molten phase. This allowing the storage of a significant amount of energy which can be reclaimed at a desired time i.e. when there is a demand for electricity. During times of high electrical demand, the silicon transitions from liquid to solid causing a release of heat energy. This heat energy is transformed into electrical energy via turbines that can service electrical demand, at a profit [].

The PCM is heated via electrical resistive heating that generate a lot of thermal energy losses and lead to high element temperature. This project will tackle the same problem using electromagnetic heating system in a bid to reduce the thermal losses in the system.

The purpose of this project is to research, model, build and test materials that retain permanent magnetism at high temperatures.

  1. Do a literature and product search for materials that are solid and permanent magnets at 1400 K and preferably up to 1700 K and model prospective materials
  2. Test selected materials
  3. Build and test an electromagnetically actuated high-temperature device

Project team members

Project students

  • Gitonga Njeru
  • Nikko Mugweru Kahindi

Supervisors

  • Dr Andrew Allison

1414 Degrees contacts

  • Jordan Parham
  • Grant Mathieson

Mechanical engineering contacts

  • Dr Reza Ghomashchi
  • Will Robertson
  • James Anderson

Objectives

To create an electromagnetically actuated device capable of:

  1. Heating the Phase Change Materials(PCM) to its melting point (1000K - 1700K).
  2. Creating an energy density of at least 1MWh/m^3 and a power density of 250kW/m^3 in the PCM.
  3. Efficiency greater than 90%

Background

Curie temperature

The Curie temperature is the temperature above which the spontanteous magnetization (ferromagnetism) vanishes; it separated the disordered paramagnetic phase T > T_c from the ordered ferromagnetic phase at T < T_c[1].


Method

Results

Conclusion

References

[1] [1] Yekini Suberu, M., Wazir Mustafa, M. and Bashir, N. (2014). Energy storage systems for renewable energy power sector integration and mitigation of intermittency. [online] ELSEVIER.

[2] Divya KC, Ostergaard J. Battery energy storage technology for power systems —an overview. Electr Power Syst Res 2009;79:511–20.

[3] C. Kittel, Introduction to solid state physics. New York: J. Wiley & Sons, 1971

[4] ...