Difference between revisions of "Projects:2019s1-113 High Curie Temperature Magnetic Materials"
(→Project team members) |
|||
Line 22: | Line 22: | ||
# Build and test an electromagnetically actuated high-temperature device | # Build and test an electromagnetically actuated high-temperature device | ||
− | + | ==Project team members== | |
==== Project students ==== | ==== Project students ==== |
Revision as of 17:15, 20 May 2019
Abstract here
Contents
Introduction
The current electric power sector is trying to increase the availability, reliability and security of energy supply to the consumers. This pursuit has increased the need to integrate renewable energy (RE) into the electricity sector as a strategy to curb the problem of energy deficiency especially in isolated off-grid settlements. However, the variability in the sources of Renewable supply coupled with conditional changes in the level of energy consumption with respect to time has brought to focus the necessity for electrical energy storage systems (ESSs) [1].
Currently, in the energy sector the issue of intermittency is currently solved using battery energy storage systems (BESS). However, BESS faces some key challenges. Once the batteries get full, battery storage will lead to wastage of all other unused renewable energy. Battery storage also faces reduced efficiency as the batteries get older [2].
As the technologies continue to grow, more and more ESSs emerged with increased efficiency such as thermal energy storage systems (TESS), pumped hydro system (PHS), compressed air energy storage (CAES), fuel cell (FC)3 and superconducting magnetic energy storage (SMES) [3].
1414 Degrees is a company that specializes in Thermal Energy Storage Systems(TESS) they have developed a special Phase Change Material(PCM). A brief overview of how the TESS works is the PCM is heated using electricity up to 1414°C at this temperature, the silicon transitions to a molten phase. This allowing the storage of a significant amount of energy which can be reclaimed at a desired time i.e. when there is a demand for electricity. During times of high electrical demand, the silicon transitions from liquid to solid causing a release of heat energy. This heat energy is transformed into electrical energy via turbines that can service electrical demand, at a profit [].
The PCM is heated via electrical resistive heating that generate a lot of thermal energy losses and lead to high element temperature. This project will tackle the same problem using electromagnetic heating system in a bid to reduce the thermal losses in the system.
The purpose of this project is to research, model, build and test materials that retain permanent magnetism at high temperatures.
- Do a literature and product search for materials that are solid and permanent magnets at 1400 K and preferably up to 1700 K and model prospective materials
- Test selected materials
- Build and test an electromagnetically actuated high-temperature device
Project team members
Project students
- Gitonga Njeru
- Nikko Mugweru Kahindi
Supervisors
- Dr Andrew Allison
1414 Degrees contacts
- Jordan Parham
- Grant Mathieson
Mechanical engineering contacts
- Dr Reza Ghomashchi
- Will Robertson
- James Anderson
Objectives
To create an electromagnetically actuated device capable of:
- Heating the Phase Change Materials(PCM) to its melting point (1000K - 1700K).
- Creating an energy density of at least 1MWh/m^3 and a power density of 250kW/m^3 in the PCM.
- Efficiency greater than 90%
Background
Curie temperature
The Curie temperature is the temperature above which the spontanteous magnetization (ferromagnetism) vanishes; it separated the disordered paramagnetic phase T > T_c from the ordered ferromagnetic phase at T < T_c[1].
Method
Results
Conclusion
References
[1] [1] Yekini Suberu, M., Wazir Mustafa, M. and Bashir, N. (2014). Energy storage systems for renewable energy power sector integration and mitigation of intermittency. [online] ELSEVIER.
[2] Divya KC, Ostergaard J. Battery energy storage technology for power systems —an overview. Electr Power Syst Res 2009;79:511–20.
[3] C. Kittel, Introduction to solid state physics. New York: J. Wiley & Sons, 1971
[4] ...