Projects:2015s1-28 Wireless Rotation Detector

Supervisors

• Prof Christophe Fumeaux
• Dr Ali Karami Horestani

Honours students

• 2015: Guowei Deng and Shuopeng Wang, see Wireless Rotation Detector

Project objects

Scope

• Design and construct a portable wireless device which can accurately measure the speed of rotating object.

Specific Aims

The aim of the project is to design and construct a portable wireless device which can be used for rotation speed measurement. The device is supposed to consist of antennas, absorbers, Arduino UNO Board with software, etc. The outcomes of the project will be as follows:

• A metamaterial absorber with resonant frequency of 2.4GHz
• A planar dual-antennas with capability of transmitting and receiving signals
• A software system for rotation speed calculation

The device should be able to measure the rotational speed of various objects such as sport equipment, car tyres, turbines, fans, etc. The system shall be operational under a set of circumstances and able to achieve reliable results.

Background & Significance

• Motivation

The rotation speed measurement devices have already ubiquitously used in industries. They are embedded on turbines, wheels or fans to extract the rotation speed of objects. However, most of commonly used angular speed measurement devices, such as laser tachometer, use visible light. One of the constraints in such devices is that the line of sight cannot be impaired [1]. Hence, the optical devices cannot be used if there is an obstacle between rotating objects and the test devices or under sophisticated circumstances such as fog or smoke.

In order to improve the performance of the measurement device, the 2.4GHz electromagnetic waves will be used instead of visible light due to its good ability of propagation. Accordingly, the devices can be used under more complicated situations, even if the line of sight has been impaired, once delivered.

• Technical Background

1. Polarization of Antennas The polarization of antenna is defined as “the polarization of the wave transmitted (radiated) by the antenna” [2]. There are 3 different types of polarization including linear polarization, circular polarization and elliptical polarization [2]. All of them are defined as “time-varying direction and magnitude of the electric field vector” [2].

2. Polarization Loss Factor Polarization loss is defined as the power loss due to polarization mismatch. For example, if a horizontally polarized antenna communicates with a vertically polarized antenna, the vertically polarized antenna will transmit vertically polarized waves, while the horizontally polarized antenna can only receive horizontally polarized wave. Thus, there is no power transfer between a horizontally polarized antenna and vertically antenna according to the reciprocity principle. In contrast, if 2 vertically polarized antennas communicate with each other, the power transfer will be maximum. Hence, if two linearly polarized antennas are rotated from each other by an angle θ, the polarization loss factor base on power loss for polarization mismatch is defined as

                                                𝑃𝐿𝐹 = 𝑐𝑜𝑠2θ

Key Requirements

• Metamaterial Absorber shall absorb at least 90% (-10db) power at 2.4GHz when it has same polarization with antenna.

• Dual antennas shall work at 2.4GHz and the crosstalk between 2 antennas shall be less than -40dB.

• Portable system shall be operational up to 50cm from the rotating object.

• Portable system shall accurately measure the rotating object in both low and high speed.

Proposed Approaches

• Method exploited - ‘Divide-And-Conquer’.

• The entire project can be decomposed into several aspects.

• Hardware (design required)

1. Metamaterial Absorber
2. Dual-Antennas

• Software

1. Calculation Algorithm for rotating speed
2. GUI

• Other Components (from market or school)

1. VCO
2. Arduino UNO Board
3. Power Detector

Hardware Design

• Understand the requirements and specifications of the hardware
• Design the hardware in software such as HFSS
• Fabricate the designed hardware
• Measure the prototype and compare the measured results with simulation results
• Redesign if the prototype does not meet requirements

alt text

Software Design

• Software design will start after antenna and absorber design has been finished.
• Software – in C language, based on the Fourier Transform
• Combine software, hardware and other components together and measure the rotating speed.
• Redesign if the measured speed and real speed are not identical.

Entire System

• The entire system is the integration of all several aspects.
• Use ‘Waterfall’ model for the system design.

alt text

Schedule and Milestone

• Milestone in Semester 1

alt text

• Milestone in Semester 2

alt text

Reference

[1] C.A Balanis, “Antenna Theory Analysis and Design”, 3rd ed., New York: Wiley, 2005.

[2] “Arduino FFT Library”, openmusiclabs, Available: http://wiki.openmusiclabs.com/wiki/ArduinoFFT.

[3] D. Schurig, J.J. Mock, and D. R. Smith, “Electric-filed-coupled resonators for negative permittivity metamaterials”, Appl. Phys. Lett. 88, art. no. 041109(2006).

[4] Y. Chen, “Wireless Rotation Detector for Sport Equipment”, 2014.

[5] T. Mark, “System Overview,” Wireless Rotation Detector for Sport Equipment, 2014, pp 6-8.

[6] H. M. Lee, “Absorption Bandwidth-Enhanced Metamaterial absorber Using In-planed ELC resonator and Cut-Wire,” available: http://ournal.sapub.org/eee [Accessed: 22 March 2015]

[7] A. Grasso, Notes of Project Management for Electrical Engineering & Sustainable Energy, 2014. [Online]. Available: https://myuni.adelaide.edu.au/bbcswebdav/pid-5997024-dt-content-rid-6342045_1/courses/3420_ELEC_ENG_COMBINED_0001/Project%20Management%20%283024%20%26%203029%29%20Lecture%20Notes_2014.pdf