Projects:2014S1-43 Inverter Drive Experiment

From Projects
Revision as of 14:47, 1 October 2014 by A1616701 (talk | contribs) (→‎Supervisors)
Jump to: navigation, search

Project Aims

1. A student experiment will be developed to show the principles and operation of the inverter drive system.

2. Design and install an inverter drive system which includes both hardware and software. The inverter Motiflex e100 is the most important part in this experiment.

3. Test the inverter drive system until all devices are able to work properly, hence use inverter to change the working conditions of induction motor as well as collect useful data.

Project Description

1. Hardware: Install one inerter drive system in the laboratory and ensure all devices working in the system are able to work properly. The working output of the system, the induction motor, is controlled by inverter. The devices include the inverter Motiflex e100, a four-pole induction motor, AC supply (240V 50HZ), fuses, AC filter, encoder, voltage and current sensor, oscilloscope and computers.

2. Software: Designing an interface based on the Mint Work Bench software in order to control the inverter by different programs and hence drive the induction motor.

3. Experiment sheet: A student experiment sheet will be developed to demonstrate the principles and operation of the inverter drive system. The specific operating steps as well as working diagram will show in the experiment sheet. In addition, report questions and sample answers are included.


Group Members

Wanshu Guo Xiaochuan Li Cheng Yue Yang


Supervisors

Dr Wen Soong

Dr Ertugrul Nesimi

Retrieved from "https://projectswiki.eleceng.adelaide.edu.au/projects/index.php?title=Projects:2014S1-43_Inverter_Drive_Experiment&oldid=269"