Projects:2015s1-01 LaunchBox
Cubesats are da bomb
Contents
- 1 Project Information
- 2 Aims and Objectives
- 3 Proposed Approach
- 3.1 Mission 1 Kit
- 3.2 SUSat
- 3.3 Launchbox
- 3.3.1 Proprietary OBC
- 3.3.1.1 Needs identification and Requirements Document
- 3.3.1.2 Research
- 3.3.1.3 Trade-off Analysis
- 3.3.1.4 Generate Feasibility Report
- 3.3.1.5 Generate Map of System Using Core
- 3.3.1.6 Use Altium to design prototype of PCB for the OBC
- 3.3.1.7 Fabricate Prototype PCB of OBC and Populate
- 3.3.1.8 Prototype Testing
- 3.3.2 Autonomous ACDS
- 3.3.1 Proprietary OBC
- 4 Project Management
- 5 Conclusions
- 6 References
Project Information
Background
Project Team
Morgan Smith
Aaron Williams
Jack Mclean
Mark Prodoehl
Supervisors
Commercial
Academic
Cubesats
Launcbox
Mission 1 Kit
Mission 1 Program
QB50
SUSat Project
ADCS sensors
Nadir Sensor
Experimental Payload: MASP
Launchbox Cubesat
EPS
Solar Panels
Load Regulators
Batteries
Controller
OBC
Microcontroller
Interfacing
Memory: Primary
Memory: Secondary
ADCS
Sensors
Actuators
Autonomous System
Experminetal Payload: Mission 1 Experiments
Aims and Objectives
Mission 1 Kit
SUSat
ADCS sensors
Nadir Sensor
Sun Sensor
Experimental Payload: MASP
Launchbox
Proprietary OBC
Autonomous ADCS
Proposed Approach
Mission 1 Kit
Hardware Prototype Development
Software Prototype
Testing
Hardware Integration
Testing
SUSat
ADCS Sensors
Nadir Sensor
Sun Sensor
Hardware Functionality Test
Software Implementation of Sun Sensor Algorithm
MASP Payload
Inquiry into Tracking Limitations and Techniques
Implementation and Testing of the Tracking Algorithm
Launchbox
Proprietary OBC
Needs identification and Requirements Document
Research
Trade-off Analysis
Generate Feasibility Report
Generate Map of System Using Core
Use Altium to design prototype of PCB for the OBC
Fabricate Prototype PCB of OBC and Populate
Prototype Testing
Autonomous ACDS
Project Management
Budget
Risk Analysis
WBS
Gantt Chart
Conclusions
References
- ↑ Test reference
