Projects:2018s1-111 IoT Connectivity Investigation
Contents
Project Team
Sponsor
Soniclean
Honours Students
Edward Gray
Jack Mansfield
Supervisor
Andrew Allison
Introduction
As computers and network connectivity has become cheaper, more and more devices have been connected to the internet for a wide variety of purposes. These devices which are not used by a human in the way a traditional computer is are known as the "Internet of Things" (IoT.)
This project is sponsored by Soniclean Pty Ltd. "Soniclean® is amongst the world's foremost manufacturers of innovative medical grade ultrasonic cleaners, with over two decades of leadership experience in the ultrasonic industry. Soniclean® ultrasonic cleaners provide a faster, safer alternative to conventional cleaning methods and, using Soniclean's unique Pulse Swept Power® technology, give a superior cleaning performance."[1]
This project seeks to add IoT capability to Soniclean’s ultrasonic cleaning machines to enable new monitoring and auditing functionality. The project aims to develop a system to enable Soniclean's ultrasonic cleaning machines to report their operational status back to a central server. While there are IoT solutions commercially available on the market, Soniclean has determined that they need at least a partially custom solution as they have a unique set of requirements.
Abstract
To meet requirements outlined by Soniclean, we develop a prototype device on top of the existing and widely available Raspberry Pi hardware platform and the MQTT IoT data transmission protocol that will collect data from sensors embedded within Soniclean’s ultrasonic cleaners all over the world and send that data to a central server operated by Soniclean. This will enable Soniclean to offer new auditing and monitoring services for their products and thus grow their business.
We do not implement sensor or back end server systems, that being the responsibility of Soniclean. We only develop a means to collect sensor data and transmit that data back to Soniclean.
Background
About Ultrasonic Cleaning
The operation of Ultrasonic cleaners is not relevant to the rest of this project, except as context for why Soniclean seeks to measure and report the particular parameters on their machines.
In ultrasonic cleaning, items to be cleaned are placed in a solvent bath of mildly alkaline water. Transducers then blast sound waves through this bath at frequencies above human hearing, hence ultrasonic cleaning. These high frequency, high intensity sound waves cause cavitation- at the trough of the sound wave, there is a region of low pressure, which causes the solution to boil, forming a bubble. As the wave moves on, to it causes this bubble to compress with great force- over 20,000 PSI. This forcefully removes any contaminants from the surface of the objects being cleaned on a microscopic level.[2]
System Design
System Overview
A high level overview of the system is shown below. Sensors (yellow) collect data on the performance of the Ultrasonic cleaner. The compute system (green) collects that data, performs any required processing and saves that data locally. It then sends the data off across the Internet (blue) to the Soniclean server (red.)
Hardware
Compute Platform
To meet the needs of this project, a computing platform is required to be able to acquire, process, store and transmit sensor data. There are a number of requirements for whatever platform this system is to use, outlined below:
• The platform shall be low cost, to allow for adaption to economic use at scale
• The platform shall be widely available, to allow for adaption to use at scale
• The platform shall be well supported, both to assist in development and usage
• The platform shall have the required I/O- RS-232 serial and connectivity to a cellular modem
• The device shall have local storage
Considering, these requirements, and on recommendation from Soniclean, the Raspberry Pi 3 Model B was selected as the computing platform for this project. The Raspberry Pi is available for US $35 globally, has rich I/O including GPIO, UART, SPI, I2C, USB, Ethernet, WiFi, Bluetooth and having sold millions of units, has a broad and active community forum.
The Raspberry Pi also runs a full Linux environment, which makes developing one device very easy, making software development fast and simple. Storage on the Raspberry Pi is provided by a micro SD card, which can provide many gigabytes of storage for low prices, allowing for storage of many log files locally.
Networking Hardware
Modem hardware is required to communicate with the local cellular network to give the device internet access. The requirements for this are outlined below.
• The modem shall support multiple frequencies for worldwide operation
• The modem shall support for 3G networks
• The modem should have a reasonable cost
• The modem shall be software and hardware compatible with the Raspberry Pi
• The modem shall have support for an external antenna
Other Hardware
Rs485 adapter, mounting, antenna, interface
