Projects:2020s1-2450 Ambient Intelligence Technology for Assisted Elderly Living

From Projects
Revision as of 16:25, 27 July 2020 by A1715706 (talk | contribs)
Jump to: navigation, search

Ambient Intelligence Technology for Assisted Elderly Living

Introduction

The project will involve the development of a Smart Bed system designed for use by bedridden and elderly patients for monitoring and notification purposes, into a larger connected network. For this Honours project, there will be collaboration with a Mechanical Engineering Honours team that will also use the same smart bed system, but they are still considered separate projects. The team will focus on the development of custom software, making use of commercially-available sensors and components which will need to be integrated into a single system, culminating in a prototype smart bed for proof-of-concept demonstrations.

Project Team

Project Supervisor

  • Doctor Mathias Baumert

Undergraduate Members

  • Martin Gallo Picon: Bachelor of Engineering (Electrical and Electronic) (Biomedical) (Honours)
  • Dingbang Lu: Bachelor of Engineering (Electrical and Electronic) (Honours)


Overview

System Description

The project goal is to develop a system capable of providing various patient monitoring functions to assist in elderly living, with comparable accuracy to clinical monitoring methods. Several patient vital signs have been identified as important for health monitoring purposes amongst vulnerable populace, these are heart rate, respiration rate and core body temperature. An additional function was requested by the project sponsor, Uniting Communities, which is a fall detection feature. Fall detection has been requested because it is one of the more common and damaging problems for bedridden patients in aged care. Thus, the sponsor requested the group to design a method to detect falls, which would be used in conjunction with an actuator in future work to prevent falls before they occur. The scope of this project does not include design or implementation of actuators to prevent the falls that are detected, mainly due to time and budget constraints. The following diagram shows a high-level description of project functionality and data connections. Inputs are sent from three different sensor types, and this data is used to complete the expected functionality of the prototype.

High Level System Diagram of the Smart bed

Similar IoT health monitoring projects have been done in the past in terms of IoT health monitoring of vital signs, this project being based on several of these examples. The main difference is that the Smart Bed for Assistive Living aims to combine the most accurate monitoring methods across the health monitoring IoT projects that Group 2450 has researched. The result will be working prototype that incorporates the sensing methods describe previously into a proof-of-concept overlay.