Projects:2014S1-04 All Electric Vehicle for City Use

From Projects
Revision as of 17:06, 5 October 2014 by A1616653 (talk | contribs) (Outline of proposed work)
Jump to: navigation, search

This project is a continuing project from 2008. The aim of the project in this year is to build an electric vehicle driving system to achieve the road test and data logging.

Project information

Motivation and Background

  • Facing the increasing air pollution and Carbon Dioxide emissions, the electric vehicle is a feasible alternative choice of traditional vehicles with internal-combustion engines.
  • The most significant electric motor control principle applied in this project is the Field Oriented Control (FOC). In the operation, two phase currents of motor are sampled and converted into a two co-ordinate time invariant system by Clarke Transformation and Park Transformation. By controlling the converted torque component, we can achieve the torque control as well as speed control.

Previous work

Based on the works in previous years, the battery and charging system with its monitoring system are completed. For the motor driving system, the Semikron SKAI5001 inverter which is embedded TMS320F2407 DSP is used as the main electronic device to achieve the DC-AC transform. However, the tests on Semikron inverters are failed in last year. Thus, the motor control project should be built on the new inverter and DSP.

Project Aims

The aim of this project is to converter the MAZDA MX5 with internal combustion engine to an electric vehicle use electrical energy for city use. This year, the project group is expected to achieve motor control (Field Orientated Control) based on operations of an inverter, current and position sensors that controlled by a Digital Signal Processor. The inverter, current sensors and position sensors are all required to be selected and ordered during the year to meet requirements.

Outline of proposed work

  • Order and test Resolver to Digital Converter
  • Integrate DSP with Resolver to digital converter
  • Achieve Serial Peripheral Interface communication in DSP
  • Order and test current sensors
  • Integrate DSP with current sensor
  • Achieve ADC control in DSP
  • Test TOYOTA Prius Inverter
  • Test SemiTeach Inverter
  • Integrate DSP with inverter
  • Achieve inverter control in DSP
  • DSP programming for FOC control
  • Motor test

Milestone

  • Inverter switching test. Verify the functionality of inverter.
  • DSP programming of PWM generation.
  • 120 and 180 degree conduction tests of inverter.
  • DSP programming of ADC, realize the sampling of current sensor output.
  • DSP programming for Resolver to Digital converter communication. Realize the rotor position detection.
  • DSP programming for FOC open loop test. Based on the variables set, generate corresponding space vector PWM signal.

Team

Group members

  • Mr Shuaiqi Cao
  • Ms Shiyun Zhao

Supervisors

  • Prof Nesimi Ertugrul
  • Dr Andrew Allison

Resources

  • Semiteach Inverter
  • LEM current sensors
  • Analog Device EVAL-AD2S1210 Resolver to digital converter evaluation board
  • Texas Instruments TMS320F28335 DSP
  • Texas Instruments code composer studio 5.3 software