Projects:2017s1-190 Modelling and Validation for Synchronous Generators
Contents
- 1 Team Members:
- 1.1 Supervisors:
- 1.2 Aim:
- 1.3 Motivation:
- 1.4 Software Model of The Generator in Matlab:
- 1.5 Measurement of Rotor Angle Using Encoding Wheel:
- 1.6 Lab-View and Data Acquisition (DAQ) Board:
- 1.7 EES Steady State Testing:
- 1.8 Synchronous Machine Saturation Model:
- 1.9 Steady State Capability Test:
- 1.10 Load Rejection:
- 1.11 Risk Analysis
- 1.12 Conclusion:
- 1.13 References:
Team Members:
- Ainal Syazwan Itamta
- Binhao Li
Supervisors:
- Dr. Andrew Allison
- David Vowels
Aim:
The aim of this project is to identify the dynamical parameters of the synchronous generators in NG06 Junior Lab. The model will be calibrated and verified via several specified tests on the machine. After that, the test procedures and designs specification will be documented.
Motivation:
The steady state characteristics of the synchronous generators are already well documented.However, the dynamical characteristics are required to be explored. Using these as guidelines, future students and academics can further analyze the synchronous machine in NG06 Junior Lab.
Software Model of The Generator in Matlab:
This section is done by Xinrui Li
Measurement of Rotor Angle Using Encoding Wheel:
This section is done by Binhao Li
