Difference between revisions of "Projects:2020s1-2413 Smart Sock for Aiding Prothesis Fit and Preventing Pressure Sores in Leg Amputees"
(→1.Introduction) |
(→1.Introduction) |
||
| Line 4: | Line 4: | ||
==1.Introduction == | ==1.Introduction == | ||
| − | The goal of this project is analysis of data from array pressure sensors and presenting it in a concise manner to a layman user and clinician via a Graphical User Interface (GUI)designed by the team . to a prosthetic limb that will measure the pressure difference and location of pressure peaks and lows across the residual limb caused by the wearing of a prosthesis. This is of interest to clinicians and patients due to the pressure difference causing health complications in patients and unnecessary wear and tear on the prosthetic itself. | + | The goal of this project is analysis of data from array pressure sensors and presenting it in a concise manner to a layman user and clinician via a Graphical User Interface (GUI) designed by the team . to a prosthetic limb that will measure the pressure difference and location of pressure peaks and lows across the residual limb caused by the wearing of a prosthesis. This is of interest to clinicians and patients due to the pressure difference causing health complications in patients and unnecessary wear and tear on the prosthetic itself. |
The project will demonstrate the knowledge that the team has learned over the duration of their study at the university and their ability to implement it. | The project will demonstrate the knowledge that the team has learned over the duration of their study at the university and their ability to implement it. | ||
Revision as of 20:00, 21 April 2020
Welcome to the wiki page for the 2020 Project Smart Sock for Aiding Prothesis Fit and Preventing Pressure Sores in Leg Amputees. This project has been undertaken as a part of Honours Research by students studying a Bachelor of Electrical and Electronic Engineering (Biomedical) at The University of Adelaide.
Contents
1.Introduction
The goal of this project is analysis of data from array pressure sensors and presenting it in a concise manner to a layman user and clinician via a Graphical User Interface (GUI) designed by the team . to a prosthetic limb that will measure the pressure difference and location of pressure peaks and lows across the residual limb caused by the wearing of a prosthesis. This is of interest to clinicians and patients due to the pressure difference causing health complications in patients and unnecessary wear and tear on the prosthetic itself.
The project will demonstrate the knowledge that the team has learned over the duration of their study at the university and their ability to implement it.
2.Background
2.1 Technical
2.2 Application
3.Research Question
4.Research Methods
5.Design
6.Testing
7.Final Results
8.Ingenuity
9.Conclusion
10.Project Team
10.1 Students
Nuzhat Farha
Marek Wojcik
10.2 Supervisor
Dr Said Al Sarawi
10.3 Stakeholders
Vivien Heng
Jane Morphett
Yiran Qu
