Difference between revisions of "Projects:2015s1-71 Inductive Power Transfers"

From Projects
Jump to: navigation, search
Line 1: Line 1:
  
 
== Aims ==
 
== Aims ==
ssss
+
The aim of this project is achieving the inductive power transmission from a primary coil to a secondary coil, meeting at least 70% efficiency, through 500mm air gap and transferring 5W power to the receiver. Meanwhile, the size and weight of the inductive power transfer, which will be built, will also be minimized.
 +
In the end, the project aims to build an inductive power transfer which can successfully charges a mobile phone-sized device with above requirements.
 +
[[File:QQ图片20151015190354.png]]
  
 
== Motivation ==
 
== Motivation ==

Revision as of 19:06, 15 October 2015

Aims

The aim of this project is achieving the inductive power transmission from a primary coil to a secondary coil, meeting at least 70% efficiency, through 500mm air gap and transferring 5W power to the receiver. Meanwhile, the size and weight of the inductive power transfer, which will be built, will also be minimized. In the end, the project aims to build an inductive power transfer which can successfully charges a mobile phone-sized device with above requirements. File:QQ图片20151015190354.png

Motivation

ssss


Archimedes.jpg