Projects:2014S1-11 Wireless Rotation Detector for Sport Equipment

From Projects
Revision as of 12:38, 2 October 2014 by A1206514 (talk | contribs) (high level plan)
Jump to: navigation, search


High-Level Plan

  • Phase 1 :
    • Generating the ISM frequency by using the voltage control oscillator.
  • Phase 2 :
    • Using the transceiver to send the signal.
    • The absorber is attached to the target object.
    • Receiving the reflected signal from absorber.
  • Phase 3 :
    • Separating the received signal from the transmitted signal through using of bidirectional-coupler or crosstalk-reduced receiver.
  • Phase 4 :
    • Using the power of the separated received signal to calculate the rotation speed of the target object.

Team

Group members

  • Mr Yizhang Chen
  • Mr Todd Mark
  • Mr Thomas Davis

Supervisors

  • Dr Thomas Kaufmann
  • Prof. Christophe Fumeaux

Resources

  • Bench 10
  • Standard PC
  • Application software
    • ANSYS HFSS
    • DraftSight
    • Processing 2
    • Arduino IDE
  • Arduino UNO Board
  • DC Power supply
  • Signal Generator
  • Arbitrary Function Generator
  • Oscilloscope
Retrieved from "https://projectswiki.eleceng.adelaide.edu.au/projects/index.php?title=Projects:2014S1-11_Wireless_Rotation_Detector_for_Sport_Equipment&oldid=317"